Miniature credits thanks to FatRatMiniatures

MinibasedKitbash Studio

Kitbash, repose and support your 3D printed miniatures in one browser tab.Free account · Files stay on your computer

Start Kitbashing→ Try the tutorial, no account needed →

Built with our patrons

See the tools ↓

Works with

STLOBJPLY3MF

Your files stay on your computer.
Nothing is uploaded.

Why it exists

Kitbashing used to take three programs and a lot of guessing. Now it takes one tab.

Minibased reads the kits you already own, puts the pieces together on magnets, lets you re-pose a limb and supports the finished miniature for printing. Every cut and every socket is computed on your machine.

0 MB

Nothing leaves your computer

Minibased works inside your browser tab. Files are read, cut and supported on your machine, then download straight back.

On your machine:

  • Read STL, OBJ, PLY and 3MF files
  • Cut, pose and support in the browser tab
  • Download the finished mini straight back
  • Keep your projects in a folder you choose
  • Pick up a project where you left it
Open the editor→

Kit

Snap a whole kit together

Drop a folder of STL files into the Armory. Pieces dock on magnets, Autokit builds complete minis from the parts you have, and 3-point align makes joints sit flush.

In this tool you can:

  • Import a whole kit at once
  • Let Autokit build minis from your parts Patreon
  • Dock pieces on magnets and 3-point groups
  • Fill gaps with the contact layer
  • Mirror a docked piece without losing its joint
Open Kit→

Pose

Bend a limb where you want

Place a joint with a ring around an elbow, a wrist or a neck, then turn the part with the handle or the gizmo. The surface follows and the seam stays clean.

In this tool you can:

  • Place a joint with a ring
  • Turn the part with the handle or the gizmo
  • Bend elbows, wrists, necks and knees
  • Keep every joint listed, ready to change
  • Smooth a seam with a brush
Open Pose→

Split

Cut a piece and swap a part

Cut along a ring or a flat plane to swap a hand, a head or a weapon. A peg and its hole plug the parts back together.

In this tool you can:

  • Cut along a ring or a plane
  • Plug parts back with a peg and its hole
  • Swap a hand, a head or a weapon
  • Reshape a new piece to meet the cut
  • Hide or show each part with its eye
Open Split→

Supports

Support it for your FDM printer Patreon

Supports grow from the overhangs as trees with small tips, so they come away clean. Add a point by hand, then export the mini with its supports in the same 3MF.

In this tool you can:

  • Find every overhang
  • Grow trees with thin tips
  • Keep a gap from the model
  • Edit points by hand
  • Export STL, OBJ, PLY or 3MF with supports
Open Supports→

Free to start. Patrons get more.

A free account opens Kit, Pose, Split and Smooth. Patrons also get Supports and Autokit, and decide what we build next.

Not sure yet? Try the tutorial on a practice mini, no account needed.